Electric Actuators

We make available the Single Phase Quarter Turn Electrical Actuator used for the fabrication of Valves. The Electrical Actuator we offer is widely used in the Chemical Industry, Petroleum Industry, Paper Industry, Power Plant, Metallurgy, Pharmacy, Water Treatment System, Textile Industry, Food Processing, Building Automation etc. We are a reputed Single Phase Quarter Turn Electrical Actuator Manufacturer and Exporter based in India.

Features :

• Torque : 15 Nm to 4000 Nm
• Made of Aluminum Alloy
• Resistant to heat, acid and alkali
• It is water proof and dust proof
• High efficiency, low power consumption and outstanding weatherproof heavy duty motor
• Steady start tempo for efficiently avoiding water hammering to extend the service of life tubes
• All the joint are armed with waterproofing seal (IP 67)
• Continuous mechanism position indication
• Low noise level
• Built  in thermal protection which checks the motor from burning out
• Auto declutch wheel type manual override
• Sophisticated design manual override without any clutch to protect the user from injury
• (Model: MOD 3-1 to MOD 12)

Various Options :

• On Off Type Integral Starter Unit
• On  Off Type
• Potentiometer Feedback
• Modulating / Regulating Type
• Additional Limit Switches (2 Units)
• Signal Input : 4 ~ 20 mA / 1 ~ 5v DC / 2 ~ 10V DC

Standard Voltage :

• 24V DC
• 220V AC
• 110V AC

Three Phase Quarter Turn Electrical Actuator we manufacture and export finds extensive usage in the Power Plant, Water Treatment System, Metallurgy, Petroleum Industry, Chemical Industry, Pharmacy, Paper Industry, Textile Industry, Food Processing, Building Automation, etc.

Features :

• Torque : 30 Nm to 12000 Nm
• Electric Actuators on 100 Nm and above are installed with torque switches for over-load protection
• Standard enclosure to water jet proof will water tight proof IP 67
• Squirrel cage motor is of encapsulated type, on high stall torque and low inherent force for seating & unseating of valves
• All motors are integrated with build-in thermal protection
• The unique cam plate design does not allow over travel of limit switches
• A pair of limit switches are activated by means of simple, reliable & adjustable cam plates, mounted directly and driven by center column

Various Options :

• Potentiometer Feedback
• Additional Limit Switches (2 Units)
• Modulating / Regulating Type
• On  Off Type
• On  Off Type with integral starter unit
• Signal Input : 4 ~ 20 mA / 1 ~ 5v DC / 2 ~ 10V DC

Standard Voltage :

• 415V AC
• 230V AC
• 24V DC

Avail from us Three Phase Multi Turn Electrical Actuator which is suitable for the production of Knife Gate Valve, Gate Valve and Sluice Valve. The Three Phase Multi Turn Electrical Actuator we offer is in high demand for use in Power Plant, Water Treatment System, Petroleum Industry, Metallurgy, Chemical Industry, Pharmacy, Paper Industry, Food Processing, Textile Industry, Building Automation, etc. We make available the Three Phase Multi Turn Electrical Actuator at rock bottom prices.

Features :

• Torque : 100 Nm to 2400 Nm
• Easy mounting, transmitting with equilibrium and low failure rate
• All joints are armed with waterproofing seal (IP 67) which is suitable for outdoor use
• Thermo switches embedded in motor winding of actuator will disconnect motor on over heating and protect for burning
• Basic version with integral starters with modulating controller, remote sensor operated intelligent series
• Long valve life via soft start up and gradual closing
• It adopts gear group with small modules fitting which can indicate accurate position of actuators
• Torque switch will stop the motor automatically in case of over torque in the valve

Various Options :

• Potentiometer Feedback
• Signal Input : 4 ~ 20 mA / 1 ~ 5v DC / 2 ~ 10V DC
• On  Off Type
• On  Off Type with integral starter unit

Standard Voltage :

• 415V AC Three Phase

Clients are eased with the availability of the Linear Electric Actuator which is ideal to be used for Globe Valve, high temperature thermic fluid and steam applications. Owing to the efficient functioning of the Linear Electric Actuator, it is in massive demand for use in Thermic Fluid lines for Furnace & Steam Boilers, Petroleum Industry, Chemical Industry, Water Treatment System, Pharmacy Industry, Power Plant, Metallurgy, Paper Industry, Food Processing, Textile Industry, Building Automation, etc. We are a reputed Linear Electric Actuator Manufacturer and Exporter located in India.

Features :

• Torque : 150 Kgf to 1000 Kgf
• Split phase reversible capacitor start-run motor having magnetic rotor acts as a prime mover
• Designed with linear output giving high thrust
• Manual operation facility is provided to operate valve in case of power failure or during installation of actuator on valve
• All joints are armed with waterproofing seal (IP 67) suitable for outdoor environment

Various Options :

• Potentiometer Feedback
• Additional Limit Switched (2 Units)
• On â�� Off Type
• Modulating / Regulating Type
• Signal Input : 4 ~ 20 mA / 1 ~ 5V DC / 2 ~ 10 V DC
• With Interface Unit

Standard Voltage :

• 230V AC

We bring forth Damper Electric Actuator equipped designed using sophisticated modular concept making it suitable for all types of quarter turn valves. Also the Damper Electric Actuator finds extensive use in the Dampers for HVAC industry, air control in damper for HVAC systems fire and smoke control in damper for HVAC systems, operating duct damper, cold & hot water lines. Avail from us Damper Electric Actuator at market leading prices within the scheduled time frame.

Features :

• Degree of protection IP 65
• Torque : 4 Nm to 40 Nm
• Low noise level
• Angle of rotation adjustable by mechanical stopper
• Spring Return / Non Spring return type
• New generation
• Low power consumption
• Better accuracy and longer service life
• Brushless DC motors with reversible switch option to change rotation direction
• Mounting on short shaft is feasible compact.
• Light weight

Various Options :

• Potentiometer Feedback
• Additional Limit Switched (2 Nos)
• Spring Return Type
• On  Off Type
• Modulating / Regulating Type
• Signal Input : 4 ~ 20 mA / 0 ~ 10 V DC

Standard Voltage :

• 230V AC
• 24V AC / DC

Enlisted with the prominent names, we have a well-maintained set in Ahmedabad(India) and cater to different markets. We, along with our veteran packaging professionals, ensure that the packaging products commence keeping the packaging guidelines in consideration. We strictly use quality packaging material to evade loss during transit.

Details

• Torque - 35NM TO 32000NM
• Supply - 220VAC & 415VAC (other on request)
• Arm - WCB / S.STEEL
• Foot bracket - WCB / S.STEEL

Owing to our speedy distribution network, we are capable to render quickly and hassle free deliveries. In order to deliver high quality product range, we make use of the premium raw material that is sourced from the reliable places and that too after complete quality assurance.

Electrical Actuator Details:

• Manufactuator  - Cair Euromatic Automation Pvt.ltd.
• Brand / Model - Cair / Atm-in
• Characteristic - On-off Type With Integral Starter Unit Controller 
• Power Supply - 415v Ac, 50 Hz
• Housing & Cover - Cast Iron
• Enclosure - Water Tight Ip 67
• Ambient Temperature - -10°c ~ 50°c
• Torque Switches - 2 X Spdt
• Limit Switches - 2 X Spdt
• Stall Protection - Current Trip Provided With Starter Unit
• Indicator - Continuous Position Indicator
• Manual Override - Provided

Integral Starter Unit Details:

• Selector Switch - Open / Stop / Close.
• Selector Switch - Auto / Manual Or Local/remote.
• Indicating Lamps - Open / Close / Error.
• Enclosure - Ip 67 Weather Proof & Dust Proof.
• Blinking Led Lamp Indication During Open/close Operation.
• | Red - Fully Open | Green - Fully Closed.
• Automatic Phase Rotation Correction And Phase Loss Protection.
• 24v Dc Voltage Level Is Applied For Remote Control.
• Easy And Flexible User Connection Way.
• Non-penetrate Local Control Switch With Hall Effect Device To Improve Water Proof Feature.
• Five Passive Contacts To Indicate The Working Status Of The Electric Actuator And Facilitating The Monitoring Of The Electric Actuator By Dcs System.
• Operating Mode Select Switch Can Be Locked With Ordinary Lock To Prevent Improper Operation.

Size

• Size - 2” to 12”
• MOC - CI/ WCB / CF8 / CF8M
• Sleeve - NBR / EPDM
• Pressure - Upto 10kg / Cm²
• Temp - Upto 80°C / 220°C
• Ends - Flanged Type